Pay in 4 interest-free payments
JLM Engine Oil Stop Leak J06055
NOW
$66.92
afterpay
Or 4 interest-free payments of
$16.73
In stock at 1 of our locations
🚛
Free NZ shipping
🔒
12 month warranty on all parts
✅
NZ WOF compliant
🔧
Fitting available NZ wide
Worn engine oil seals create leaks that are messy, bad for the environment and your wallet. While replacement seals tend to be inexpensive, accessing them tends to involve significant dismantling and high garage labour bills. JLMs Engine Oil Stop Leak additive provides an inexpensive solution.
As they age, oil seals lose their flexibility, which affects their sealing properties. This process worsens on engines that have suffered from neglected oil changes, or endured low-quality (or incorrect specification) lubricant that contained insufficient oil seal preservative additives. JLM's J06055 Engine Oil Stop Leak contains the latest in seal-swell additive technology that helps restore their pliability, which also compensates for a degree of wear on the seal lip surface.
JLM Lubricants' Engine Oil Stop Leak also supports the lubrication system of an older engine, by enhancing oil viscosity slightly. Additional benefits include the potential to improve both oil pressure and cylinder compressions, along with the possibility to reduce the quantity of lubricant burnt within the combustion chambers, thus reducing oil consumption further. For cars that suffer from excessive oil consumption but exhibit no external leaks, JLM's Stop Smoke offers a more targeted solution.
For these reasons, JLM's Engine Oil Stop Leak is beneficial for older, higher mileage engines. It does not offer a solution for oil seals that have collapsed, or have suffered from mechanical damage, such as a puncture.
While it can be added to the oil at any point, JLM recommends dosing at service time. An oil-flush additive should be added to the sump, for which JLM Lubricants recommends its Engine Oil Flush, before the old oil is drained and the fresh lubricant added.
Substitute 250ml of the new oil with JLM Lubricants' Engine Oil Stop Leak. 250ml JLM Engine Oil Stop Leak treats 3 to 6 litre of motor oil. Never overfill the sump, which risks causing additional problems, such as pressurising the crankcase that risks increasing oil leaks.
As its seal-swell ingredients are so effective, it should not be used in other hydraulic systems, such as automatic gearboxes, Dual Clutch Transmissions (DCT), or power steering systems. It swells all rubber components within those systems indiscriminately, affecting the intended operation and may even enhance wear. JLM's Engine Oil Stop Leak is strictly for the lubrication systems of combustion engines, only.
As they age, oil seals lose their flexibility, which affects their sealing properties. This process worsens on engines that have suffered from neglected oil changes, or endured low-quality (or incorrect specification) lubricant that contained insufficient oil seal preservative additives. JLM's J06055 Engine Oil Stop Leak contains the latest in seal-swell additive technology that helps restore their pliability, which also compensates for a degree of wear on the seal lip surface.
JLM Lubricants' Engine Oil Stop Leak also supports the lubrication system of an older engine, by enhancing oil viscosity slightly. Additional benefits include the potential to improve both oil pressure and cylinder compressions, along with the possibility to reduce the quantity of lubricant burnt within the combustion chambers, thus reducing oil consumption further. For cars that suffer from excessive oil consumption but exhibit no external leaks, JLM's Stop Smoke offers a more targeted solution.
For these reasons, JLM's Engine Oil Stop Leak is beneficial for older, higher mileage engines. It does not offer a solution for oil seals that have collapsed, or have suffered from mechanical damage, such as a puncture.
While it can be added to the oil at any point, JLM recommends dosing at service time. An oil-flush additive should be added to the sump, for which JLM Lubricants recommends its Engine Oil Flush, before the old oil is drained and the fresh lubricant added.
Substitute 250ml of the new oil with JLM Lubricants' Engine Oil Stop Leak. 250ml JLM Engine Oil Stop Leak treats 3 to 6 litre of motor oil. Never overfill the sump, which risks causing additional problems, such as pressurising the crankcase that risks increasing oil leaks.
As its seal-swell ingredients are so effective, it should not be used in other hydraulic systems, such as automatic gearboxes, Dual Clutch Transmissions (DCT), or power steering systems. It swells all rubber components within those systems indiscriminately, affecting the intended operation and may even enhance wear. JLM's Engine Oil Stop Leak is strictly for the lubrication systems of combustion engines, only.
Shipping Information
Most orders land in 5–12 business days. We'll keep you updated at every step of the journey.
The Kren Bits journey:
- Order received — Day 0
- With fulfilment — Day 1–2
- Heading to courier — Day 2–4
- Shipped — Day 3–7
- Almost there — Day 5–10
- Delivered — Day 5–14
Where your part ships from:
Your order ships from the closest warehouse with available stock across our six-warehouse network — NZ, AU, TH, UK, US, and CN.
We email you at every real milestone — order received, with fulfilment, heading to courier, shipped, almost there, delivered. No chasing, no vague waits.
For more details, visit our Track Your Order page.
Product Enquiry
Got a question about this product? Need to check fitment for your vehicle? Fill in the form below and we'll get back to you within 24 hours.
4.8
★★★★★
23 reviews